INFORMATION AND INSTRUCTIONS
Application of the form:
Suitable for casting soap, candle wax and plaster. Not intended for preparing food.
Form preparation:
- Before first use, wash the mold with warm water and mild soap.
- Make sure the mold is completely dry.
- The surface must be clean, free of dust, soap or wax residues.
2. Pouring the material:
Spray the mold with alcohol to prevent bubbles and get a smooth surface (if using soap).
- To avoid bubbles, gently tap the mold against the table surface after pouring.
- Pour the soap mass, wax or plaster slowly, without spilling over the edges.
3. Curing time:
Do not use the form while the material is curing.
The time depends on the material:
• soap — from 30 to 60 minutes
• wax — 1 to 2 hours
• gypsum - according to the instructions for the specific composition
4. Product removal:
Carefully separate the edges of the shape from the product.
Gently press from below, trying not to damage the petals.
Do not pull sharply - this may deform the product or damage its shape.
5. Form maintenance:
After use, wash the mold with warm water without using abrasives.
Do not clean with sharp objects.
Attention:
- The mold is not intended for cooking food.
- Do not use with materials with temperatures exceeding +250 °C.
- Do not pierce or cut the shape - this will damage its structure.
- Keep away from pets and children.
- The material withstands temperatures from –60 °C to +250 °C
- Suitable for reuse
- Easy to clean and does not absorb odors
- Not intended for contact with food products